VERVE Elite Safety Squat Bar | PRE-ORDER EXPECTED NOVEMBER
Regular price
$449.00
Sale price
$399.00
Save $50.00
10 weekly payments of $39.90
learn more
Shipping Calculator
Please Note: Prices displayed are an estimation only, correct shipping will be calculated at Checkout. This calculator currently only checks Domestic rates
Why would you use a Safety Squat Yoke Bar if you already have an Olympic Bar?
- Helps with shoulder issues, especially during/after squatting.
- Increased quad development.
- Do you sometimes fall forward in a squat?
- Help save your back and knees.
- Great for good mornings.
- Additional calf work options in your garage.
- Add variety to your training.
Why use the VERVE Elite SSB?
- Strong, durable shoulder and arm pads in one piece to prevent sliding on the bar are securely attached for comfortable lifts. The thick, single piece of carpet padding to last long term regardless of amount of weight used
- Durable and thick vinyl covering.
- Ideal 22 degrees camber angle of the bar.
- Stiff bar without whip.
- Comfortable handle grips.
- Removable handles allowing the bar to be used for exercises like JM Presses.
- The width of the pads is allows it to be used by small and large lifters.
- Fits properly onto the VERVE Commercial Power Rack, Half Rack and Wall Mounted Rack which have 108cm between the uprights when used with VERVE Sandwich J-Hooks or VERVE Roller J-hooks.
- 127mm (5") drop ensures the weight plates are lower for improved balance and centre of gravity.
Quite simply, our customers believe this is the very best Safety Squat Bar available in Australia.
Specifications:
- Capacity: 680kg / 1500 LB
- Weight: 27.75kg / 61 LB
- Overall length: 2300mm
- Handle Spacing: 320mm (distance between centre of handles)
- Shoulder Pad Spacing: 210mm (internal distance between shoulder pads)
- Bar Diameter: 38mm / 1.5”
- Loadable Sleeve Length: 406mm / 16”
- Camber Drop: 127mm / 5”
- Handle Angle: 22 Degrees
- Product Code: VER-SSB-221
Racking the Elite Safety Squat Barbell
Please be warned that VERVE does not recommend using the VEVRE Elite Safety Squat Bar with the standard J-Hooks that are equipped with the Commercial Power Rack and other rack variants. VERVE recommends using the Elite Safety Squat Bar with the Sandwich J-Hooks, Roller J-Hooks, or the Monolift rig attachment.
As the Camber on the Elite Safety Squat Bar is slightly more narrow due to specific design requirements, the regular J-Hooks may not accommodate this bar as desired.
For more information on this matter, please contact our team now and they will happily answer any questions you have on this bar and racking system, or anything you may what to know more about.
1300 1947 48
Recommended Rack Attachments:
Want to know more about VERVE Barbells? Check out our ULTIMATE BARBELL BUYING GUIDE
Want to know how to clean and maintain your Barbell? CLICK HERE
Why would you use a Safety Squat Yoke Bar if you already have an Olympic Bar?
- Helps with shoulder issues, especially during/after squatting.
- Increased quad development.
- Do you sometimes fall forward in a squat?
- Help save your back and knees.
- Great for good mornings.
- Additional calf work options in your garage.
- Add variety to your training.
Why use the VERVE Elite SSB?
- Strong, durable shoulder and arm pads in one piece to prevent sliding on the bar are securely attached for comfortable lifts. The thick, single piece of carpet padding to last long term regardless of amount of weight used
- Durable and thick vinyl covering.
- Ideal 22 degrees camber angle of the bar.
- Stiff bar without whip.
- Comfortable handle grips.
- Removable handles allowing the bar to be used for exercises like JM Presses.
- The width of the pads is allows it to be used by small and large lifters.
- Fits properly onto the VERVE Commercial Power Rack, Half Rack and Wall Mounted Rack which have 108cm between the uprights when used with VERVE Sandwich J-Hooks or VERVE Roller J-hooks.
- 127mm (5") drop ensures the weight plates are lower for improved balance and centre of gravity.
Quite simply, our customers believe this is the very best Safety Squat Bar available in Australia.
Specifications:
- Capacity: 680kg / 1500 LB
- Weight: 27.75kg / 61 LB
- Overall length: 2300mm
- Handle Spacing: 320mm (distance between centre of handles)
- Shoulder Pad Spacing: 210mm (internal distance between shoulder pads)
- Bar Diameter: 38mm / 1.5”
- Loadable Sleeve Length: 406mm / 16”
- Camber Drop: 127mm / 5”
- Handle Angle: 22 Degrees
- Product Code: VER-SSB-221
Racking the Elite Safety Squat Barbell
Please be warned that VERVE does not recommend using the VEVRE Elite Safety Squat Bar with the standard J-Hooks that are equipped with the Commercial Power Rack and other rack variants. VERVE recommends using the Elite Safety Squat Bar with the Sandwich J-Hooks, Roller J-Hooks, or the Monolift rig attachment.
As the Camber on the Elite Safety Squat Bar is slightly more narrow due to specific design requirements, the regular J-Hooks may not accommodate this bar as desired.
For more information on this matter, please contact our team now and they will happily answer any questions you have on this bar and racking system, or anything you may what to know more about.
1300 1947 48
Recommended Rack Attachments:
Want to know more about VERVE Barbells? Check out our ULTIMATE BARBELL BUYING GUIDE
Want to know how to clean and maintain your Barbell? CLICK HERE
Unmute