AUSTRALIAN 🇦🇺 MADE VERVE Roller J-Hooks Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER
AUSTRALIAN 🇦🇺 MADE VERVE Roller J-Hooks Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER

AUSTRALIAN 🇦🇺 MADE VERVE Roller J-Hooks Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER

Regular price $275.00
 10 weekly payments of $27.50 learn more

Shipping Estimator

Submit

Please Note: Prices displayed are an estimation only, correct shipping will be calculated at Checkout. This calculator currently only checks Domestic rates

AUSTRALIAN MADE VERVE Roller J-Hooks

The all NEW AUSTRALIAN MADE VERVE Roller J-Hooks Pair are for Rigs & Commercial Power Racks. These Australian Made Roller J-Hooks are lined with High Impact Polyurethane Rollers to protect you barbell, and stand the test of time even in the busiest of gyms with minimal wear and tear.

With a sturdy 17mm pin to suit all VERVE Rig and Rack 18mm holes perfectly, these J-Hooks provide an extremely strong hold for even the biggest lifters out there, no bend, no break! These Roller J-Hooks will suit all VERVE Olympic and specialty bars, specifically designed for easy racking and a solid platform to adjust for the PR lift.

POLYURETHANE 

Polyurethane is a versatile elastomer used in many application across the globe. Its mechanical properties has been manipulated to withstand the use and abuse of any barbell for any gym. This High Impact material has a high load capacity with both tension and compression which will allow the lifter to load hundreds of kilograms worth of weight without any affect, staying strong and stable to rack the bar. 

Want to Train Outdoors?

These Roller J-Hooks have been purpose built for those looking to train both indoors and outdoors. With its specially designed powder coat finish and metal frame design, these Roller J-Hooks are built to withstand any weather conditions nature can throw at it. It’s Australian DuraGal galvanised by electrolysis with hot dipping before fabrication. During this process a layer of zinc is bonded to the steel to protect agains corrosion.  Unlike some other galvanised products, with this process the inside is as good as the outside. You could say it’s overkill on the protection for inside and outside the uprights. Then it’s fabricated followed by a proprietary process to remove excess gloss from galvanisation, followed by priming and powder coating without delay. In line with Australian powder coating standards the powder coating needs to be at least 80 micrometers thick. 

  • Step 1: Galvanisation by electrolysis
  • Step 2: Metal Fabricated
  • Step 3: Removal of gloss from Galvanisation
  • Step 4: Primed at temperature
  • Step 5: Powder coated (Specs 80 micrometer or greater thickness)

FEATURES:

  • Fits all VERVE Rig and Racks - 75*75*3mm uprights with an 18mm diameter hole 
  • Polyurethane roller to protect your barbell
  • Stand the test of time even in the busiest gyms

These ultra strong Roller J-Hooks will attach to our equipment which uses Westside Hole Spacing:

Others also purchased:

      

AUSTRALIAN MADE VERVE Roller J-Hooks

The all NEW AUSTRALIAN MADE VERVE Roller J-Hooks Pair are for Rigs & Commercial Power Racks. These Australian Made Roller J-Hooks are lined with High Impact Polyurethane Rollers to protect you barbell, and stand the test of time even in the busiest of gyms with minimal wear and tear.

With a sturdy 17mm pin to suit all VERVE Rig and Rack 18mm holes perfectly, these J-Hooks provide an extremely strong hold for even the biggest lifters out there, no bend, no break! These Roller J-Hooks will suit all VERVE Olympic and specialty bars, specifically designed for easy racking and a solid platform to adjust for the PR lift.

POLYURETHANE 

Polyurethane is a versatile elastomer used in many application across the globe. Its mechanical properties has been manipulated to withstand the use and abuse of any barbell for any gym. This High Impact material has a high load capacity with both tension and compression which will allow the lifter to load hundreds of kilograms worth of weight without any affect, staying strong and stable to rack the bar. 

Want to Train Outdoors?

These Roller J-Hooks have been purpose built for those looking to train both indoors and outdoors. With its specially designed powder coat finish and metal frame design, these Roller J-Hooks are built to withstand any weather conditions nature can throw at it. It’s Australian DuraGal galvanised by electrolysis with hot dipping before fabrication. During this process a layer of zinc is bonded to the steel to protect agains corrosion.  Unlike some other galvanised products, with this process the inside is as good as the outside. You could say it’s overkill on the protection for inside and outside the uprights. Then it’s fabricated followed by a proprietary process to remove excess gloss from galvanisation, followed by priming and powder coating without delay. In line with Australian powder coating standards the powder coating needs to be at least 80 micrometers thick. 

  • Step 1: Galvanisation by electrolysis
  • Step 2: Metal Fabricated
  • Step 3: Removal of gloss from Galvanisation
  • Step 4: Primed at temperature
  • Step 5: Powder coated (Specs 80 micrometer or greater thickness)

FEATURES:

  • Fits all VERVE Rig and Racks - 75*75*3mm uprights with an 18mm diameter hole 
  • Polyurethane roller to protect your barbell
  • Stand the test of time even in the busiest gyms

These ultra strong Roller J-Hooks will attach to our equipment which uses Westside Hole Spacing:

Others also purchased: