AUSTRALIAN šŸ‡¦šŸ‡ŗ MADE VERVE Plate Storage Horn Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER
AUSTRALIAN šŸ‡¦šŸ‡ŗ MADE VERVE Plate Storage Horn Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER

AUSTRALIAN šŸ‡¦šŸ‡ŗ MADE VERVE Plate Storage Horn Pair for Rigs & Commercial Power Rack | PRE-ORDER EXPECTED DECEMBER

Regular price $175.00
 10 weekly payments of $17.50 learn more

Shipping Estimator

Submit

Please Note: Prices displayed are an estimation only, correct shipping will be calculated at Checkout. This calculator currently only checks Domestic rates

AUSTRALIAN MADE VERVEĀ Plate Storage Horns

The ALL NEW Australian Made VERVE Plate Storage Horns are designed to fit theĀ VERVE Commercial Power RackĀ andĀ VERVE Rig Uprights. These Plate Storage Horns are specifically designed for easy movability, yet maintain and extremely strong hold for maximum loading of weight plates.

With a sturdy 17mm pin to suit all VERVE Rig and Rack 18mm holes perfectly, these Plate Storage HornsĀ provide an extremely strong hold for even a fully loaded horn, no bend, no break!

Want to Train Outdoors?

These Plate Storage HornsĀ have been purpose built for those looking to train both indoors and outdoors. With its specially designed powder coat finish and metal frame design,Ā these plate storage horns areĀ built toĀ withstandĀ any weather conditions nature can throw at it.Ā Itā€™s Australian DuraGal galvanised by electrolysis with hot dipping before fabrication. During this process a layer of zinc is bonded to the steel to protect agains corrosion.Ā  Unlike some other galvanised products, with this process the inside is as good as the outside. You could say itā€™s overkill on the protection for inside and outside the uprights. Then itā€™s fabricated followed by a proprietary process to remove excess gloss from galvanisation, followed by priming and powder coating without delay. In line with Australian powder coating standards the powder coating needs to be at least 80 micrometers thick.Ā 

  • Step 1: Galvanisation by electrolysis
  • Step 2: Metal Fabricated
  • Step 3: Removal of gloss from Galvanisation
  • Step 4: Primed at temperature
  • Step 5: Powder coated (Specs 80 micrometer or greater thickness)

They are sold as a pair of 2. If you need 2 x storage horns order a quantity of 1 (pair) and if you need 4 x storage horns order a quantity of 2 (pairs).

COMPATIBLE WITH:Ā 

FEATURES:Ā 

  • 48mm diameter and sure to accommodate 50mm calibrated plates
  • 350mm loading length
  • ThickĀ 3mm steelĀ 
  • Gloss Black powder coating
  • Quick Lock-In system for easy movability
  • Signature VERVE Laser cut 'V'

This attachment fits 75*75*3mm uprights with an 18mm diameter hole.

These heavy dutyĀ Plate Storage Horn Attachments are made with 3mm steel making them just as strong as the rest of the rack, ready to handleĀ as much weight as you can load.

Others alsoĀ purchased:

Ā Ā Ā Ā Ā Ā 

AUSTRALIAN MADE VERVEĀ Plate Storage Horns

The ALL NEW Australian Made VERVE Plate Storage Horns are designed to fit theĀ VERVE Commercial Power RackĀ andĀ VERVE Rig Uprights. These Plate Storage Horns are specifically designed for easy movability, yet maintain and extremely strong hold for maximum loading of weight plates.

With a sturdy 17mm pin to suit all VERVE Rig and Rack 18mm holes perfectly, these Plate Storage HornsĀ provide an extremely strong hold for even a fully loaded horn, no bend, no break!

Want to Train Outdoors?

These Plate Storage HornsĀ have been purpose built for those looking to train both indoors and outdoors. With its specially designed powder coat finish and metal frame design,Ā these plate storage horns areĀ built toĀ withstandĀ any weather conditions nature can throw at it.Ā Itā€™s Australian DuraGal galvanised by electrolysis with hot dipping before fabrication. During this process a layer of zinc is bonded to the steel to protect agains corrosion.Ā  Unlike some other galvanised products, with this process the inside is as good as the outside. You could say itā€™s overkill on the protection for inside and outside the uprights. Then itā€™s fabricated followed by a proprietary process to remove excess gloss from galvanisation, followed by priming and powder coating without delay. In line with Australian powder coating standards the powder coating needs to be at least 80 micrometers thick.Ā 

  • Step 1: Galvanisation by electrolysis
  • Step 2: Metal Fabricated
  • Step 3: Removal of gloss from Galvanisation
  • Step 4: Primed at temperature
  • Step 5: Powder coated (Specs 80 micrometer or greater thickness)

They are sold as a pair of 2. If you need 2 x storage horns order a quantity of 1 (pair) and if you need 4 x storage horns order a quantity of 2 (pairs).

COMPATIBLE WITH:Ā 

FEATURES:Ā 

  • 48mm diameter and sure to accommodate 50mm calibrated plates
  • 350mm loading length
  • ThickĀ 3mm steelĀ 
  • Gloss Black powder coating
  • Quick Lock-In system for easy movability
  • Signature VERVE Laser cut 'V'

This attachment fits 75*75*3mm uprights with an 18mm diameter hole.

These heavy dutyĀ Plate Storage Horn Attachments are made with 3mm steel making them just as strong as the rest of the rack, ready to handleĀ as much weight as you can load.

Others alsoĀ purchased:

Ā Ā Ā Ā Ā Ā